10
Telehealth medical diagnostic system IDIS2GO
The “Nation” adjustment is similar to the “Gender”. The predicted value standard can be set in the “Nation”
interface, which includes ERS, KNUDSON and USA. ERS is the European standard, KNUDSON is the Asian
standard, USA is the American standard.
e. Smoker and drug settings
The “Smoker” and “Drug” settings are similar to "Gender", in which the patient can change information
about smoking and drug addiction.
The display on the screen is limited, so the device will not display all items at once. When the selection
toolbar goes to “Smoker”, press the “Down” button, the items “Drug” and “Exit” will appear, as shown in the
Pictures 11, 12.
f. Exit
Choose “Exit” in the 【Personal information】interface to return to the interface 【Menu】.
Picture 11 Picture 12
2. Data management
In the 【Menu】 interface select “Data Management” to enter the【Data Management】interface, as shown
in the Picture 13. Under the interface such functions as the review, trend curve, delete data, denote value can be
realized.
Picture 13: Data management interface Picture 14: Examination selection interface
a) Review function
In the 【Data Management】 interface select “Review Function” to enter the interface【Illustration of selection】,
as shown in the Picture 14, press the “Up” or “Down” button (long press available) to change the measurement
number, and then press the “Confirm” button, the device will enter 【Main interface】 and display on it history
data. In the interface【Main interface】, with the buttons "Up" or "Down" you can constantly review the data in
the adjacent examination number, press the “Confirm” key to return to the interface 【Menu】.
b) Trend curve
In the 【Data Management】 interface select “Trend Curve” to enter the【Trend curve】, as shown in the
Picture 16. Select an option, then press the “Confirm” button to enter【Trend curve】, as shown in the Picture 15.
The curve is a summary of the saved data for the selected parameter. It reflects the trend of change in the form of a
visual image, which is convenient for comparison. If there is too much data, press the Up or Down buttons to view
all data curves. Click the “Confirm” button to return to the 【Data Management】 interface.
Picture 15: Trend curve selection interface Picture 16: Trend curve interface
c) Delete data
In the【Data Management】interface select “Delete Data” to enter the 【Delete Data】 interface, as shown in
the Picture 17. If you select “Yes”, “Standby ...” will appear on the screen, all data will be deleted, and then return
To Next Page
Loading...
Need help?
General
