Contour Next GEN 9658 User Manual

6 7
Contour
®
next GEN blood glucose monitoring system
GETTING STARTED
Your Contour next test strip
Grey Square End:
Insert this end into the test strip por
t
Sample Tip: Blood sample pulled in here
Check the Meter Display
Press and hold the OK button until the meter turns on,
about 3 seconds.
The screen displays the Power On Self Test.
88 88 88 88 88
888
All symbols on the screen and the white strip
port briey light up. It is very important to verify
that 8.8.8 displays fully and that the white light
from the test strip port is visible.
If there are missing characters or if the strip
port light is a color other than white, contact
Customer Service. This may aect the way you
see your results.
NOTE: Your meter comes with a pre-set time, date, and target range.
You can change these features in Settings. See Settings on page 31.
Target Ranges
The meter compares your blood sugar results with a Target Range
(for example, 70 mg/dL–130 mg/dL) to let you know if your test result is
above, in, or below your Target Range.
10 45 41222
200
Above Your Target Range.
10 45 41222
100
In Your Target Range.
10 45 41222
65
Below Your Target Range.
You can change Target Ranges in Settings
.
See Settings on page 31.

Contour Next GEN 9658 Specifications

General

Brand	Contour
Model	Next GEN 9658
Category	Blood Glucose Meter
Language	English