6 Commander SK Size 2 to 6 Getting Started Guide
www.controltechniques.com Issue Number: 2
Declaration of Conformity (Size 6)
Control Techniques Ltd
The Gro
Newtown
Powys
UK
SY16 3BE
The AC variable speed drive products listed above have been designed
and manufactured in accordance with the following European
harmonised standards:
These products comply with the Low Voltage Directive 73/23/EEC, the
Electromagnetic Compatibility (EMC) Directive 89/336/EEC and the CE
Marking Directive 93/68/EEC.
W. Drury
Executive Vice President, Technology
Newtown
Date: 3rd February 2006
These electronic drive products are intended to be used with
appropriate motors, controllers, electrical protection components
and other equipment to form complete end products or systems.
Compliance with safety and EMC regulations depends upon
installing and configuring drives correctly, including using the
specified input filters. The drives must be installed only by
professional assemblers who are familiar with requirements for
safety and EMC. The assembler is responsible for ensuring that the
end product or system complies with all the relevant laws in the
country where it is to be used. Refer to the User Guide. An EMC
Data Sheet is also available giving detailed EMC information.
SK6401 SK6402
SK6601 SK6602
EN 61800-5-1
Adjustable speed electrical power drive systems -
safety requirements - electrical, thermal and energy
EN 61800-3
Adjustable speed electrical power drive systems.
EMC product standard including specific test
methods
EN 61000-6-2
Electromagnetic compatibility (EMC). Generic
standards. Immunity standard for industrial
environments
To Next Page
Loading...
Need help?
General
