Control Techniques M'Ax User Manual

*
27 M’Ax Advanced User Guide
www.controltechniques.com Issue Number: 4
The speed feedback in counts / 250µs taken from the SLM encoder. This is used as source for analog output. This can be used by a PLC for
instantaneous speed measurements.
3.64 Speed feedback unfiltered
ô
±2048
ð
RO Bi

Control Techniques M'Ax Specifications

General

Protection	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit
Feedback	Resolver
Control Modes	Torque, position
Communication	CANopen
Safety	STO (Safe Torque Off), SS1 (Safe Stop 1)
Input Voltage	200-240V AC, 380-480V AC, 525-690V AC
Operating Temperature	0°C to 40°C
Storage Temperature	70 °C
Humidity	5 - 95% non-condensing
Weight	Varies by model