SM-Resolver User Guide 19
Issue Number: 4 www.controltechniques.com
Table 6.1 Key to parameter coding
Coding Attribute
RW Read/write: can be written by the user
RO Read only: can only be read by the user
Bit 1 bit parameter
Bi Bipolar parameter
Uni Unipolar parameter
Txt Text: the parameter uses text strings instead of numbers.
FI
Filtered: some parameters which can have rapidly changing
values are filtered when displayed on the drive keypad for
easy viewing.
DE
Destination: indicates that this parameter can be a
destination parameter.
RA
Rating dependant: this parameter is likely to have different
values and ranges with drives of different voltage and
current ratings. This parameters is not transferred by smart
cards when the rating of the destination drive is different
from the source drive.
NC
Not cloned: not transferred to or from smart cards during
cloning.
PT Protected: cannot be used as a destination.
US
User save: saved in drive EEPROM when the user initiates
a parameter save.
PS
Power-down save: automatically saved in drive EEPROM
at power-down.
To Next Page
Loading...
