Controls MX Series User Manual

50
AUTO START CONFIGURATION
These settings define the time delays and speeds that will be used during an auto start routine. Warm
Up Seed, Prime Speed, Cooldown Speeds are programmed here.
BATTERY RECHARGE CONFIGURATION
The module can be used to monitor the engine starting battery voltage and start the engine if the
voltage drops below a programmed setting. While the engine is running, the engine driven alternator
will recharge the battery. There are settings available to limit the minimum time between cycles as
well.

Controls MX Series Specifications

General

Brand	Controls
Model	MX Series
Category	Control Unit
Language	English