Convotherm 4 easyDial User Manual

8.2.4 Importing a Software Update
Prerequisites
The USB drive must be plugged in.
The function must have already been accessed and started.
Software update steps
Step 1
The system updates the software
The appliance will start the software update
and import the corresponding data from the
USB drive while showing the import’s
progress. The C-Dial will flash with a blue
light.
The “USB drive plugged in” indicator will flash
at the same time.
Step 2
Data transfer completed
The data transfer will be complete when the
C-Dial stops flashing and instead shows a
solid blue light.
At the same time, the “USB drive plugged in”
indicator will stop flashing and will instead
show a solid light.
8 Importing and Exporting Data
Operating instructions 66

Convotherm 4 easyDial Specifications

General

Brand	Convotherm
Model	4 easyDial
Category	Oven
Language	English