17
In more detail...
GB
IE
CLIND2BK-C Induction Hob
=
Cooking zone operation
9. Select a heat setting for the chosen cooking zone by touching the or
control. The selected temperature setting appears on the control panel.
Note: You can modify the heat setting at any time during cooking.
Note: If you don’t choose a heat setting within 1 minute, the
induction hob will automatically switch off. To proceed, switch the
cooktop on again by touching the on/off control
as described in
step 1.
Not suitable cookware
The display ashes an error signal alternating with the heat setting on the cooking
zone display in case that:
• there is no pan placed on the selected cooking zone,
• the pan you are using is not suitable for induction cooking or,
• the pan is too small or not properly centred on the cooking zone.
Note: The cooking zone will not start opeation unless there is a
suitable pan on the cooking zone.
The display will automatically turn off after 1 minute if no suitable pan
is placed on it.
Switching off
1. To turn off a single cooking zone,
rst select the cooking zone
by touching the corresponding
cooking zone selection control.
3
2. After, scroll down to the setting "0" by touching the control.
Operation
To Next Page
Loading...
Need help?
General
