24
In more detail...
CLIND2BK-C Induction Hob
GB
IE
• Care and maintenance
OFF
Warning
Always switch off the electricity supply before
performing maintenance work. In the event of a fault,
contact an ofcial distributor or authorised dealer.
If the supply cord is damaged, it must be replaced by a special cord
or assembly available from the manufacturer or its service agent.
For domestic use only.
Never place the induction hob directly into water.
Never place an empty pan on the hob as this might cause damage
to the pan. The over-temperature protection might cause an
automatic shutdown of the appliance.
When a cooking zone has been on for a long time, the surface
remains hot for some time afterwards so do not touch the glass
surface.
Occasionally check that nothing is obstructing the air inlet beneath
the induction hob.
If the surface of the hob is cracked, disconnect from power supply
the appliance to avoid any possibility of electric shocks.
Do not place rough or uneven vessels on the hob, as they could
damage the glass surface.
Avoid banging pots and pans down on the hob.
The glass surface is tough but not unbreakable.
Do not leave metal objects, such as knives, forks, spoons and lids
on the hob as they may get hot.
Do not store detergents or ammable materials beneath the hob.
Care and maintenance
To Next Page
Loading...
Need help?
General
