StreamEnjin User Manual
4
7 MIC Switches to the MIC audio source.
The button will light up when switched to this source.
8 L/R Switches to the RCA Line In audio source.
The button will light up when switched to this source.
9 Mute Mutes/unmutes the audio the system is currently tuned
into.
When muting source 1 or 2, AFV will also be turned off.
Video Section (controls the video settings of the system)
10 Scenes Selector
(PRV) scene.
Greenly lit button indicates PRV Preview.
Redly lit button indicates PGM Preview.
Transition Control Section (switches the current stream (PGM) scene to the preview
(PRV) stream and vice versa)
11 Auto (transition)
a specified time (0.3-3.0 seconds).
Go to the Setting Deck and refer to page 36 on how to
modify this specified time.
Press and hold for 3 seconds to enter Quick Mode. Refer
to Quick Mode on page 44 for more information.
12 Cut (transition)
Cut button.
Press and hold for 3 seconds to enter Quick Mode. Refer
to Quick Mode on page 44 for more information.
13 T-Bar (transition)
transition speed depends on how fast you slide the bar.
Sliding the T-bar all the way to one end will complete t
he
transition.
You can create different effects by sliding it slowly, quickly
or even hold it half way.
14 iPad Stand Allows the iPad to sit in.
15 SRC / PGM View
Selector
Pressing the button will switch video source between
HDMI source 1, HDMI source 2 and PGM.
16 Pause Stream Press this button to pause streaming.
17 GoLive Press this button to start streaming.
Press again to stop.
No. Component Description
Pressing the Auto button will begin the transition after
The transition happens immediately when you press the
Selects the current stream (PGM) scene and the preview
Slide the T-Bar to start the transition. The scene
To Next Page
Loading...