47
Chapter 8
Firmware Upgrade
Download Requirements
A computer connected to the Internet.
An empty external storage device or a USB flash drive with at least
1.1GB of free space.
Preparing the Firmware
1. On the external storage device, create a folder named.
2. Download the complete software and unzip it.
3. Save your file (in the format “_Vx.x.xxx.bin”) to the
folder.
4. Plug the external storage device to the rear USB port of the unit.
5. Refer to Upgrading the Unit on page 56 to start firmware upgrade.
Note:
A folder named must be created in the root
menu of the
USB storage device.
The firmware upgrade file (*.bin) must be placed in the
folder.
The firmware upgrade file should look like the following:
_Vx.y.yyy
where x and y combine to indicate its version and
x = 1-9
y = 0-9
The unit will upgrade using the newest firmware. For
example, if the folder has a “_V1.0.080” file and a
“_V1.1.102” file, the unit will upgrade using the
“_V1.1.102” file.
To Next Page
Loading...