Cooper Security 9750 - Account Number (Command 117); Downloader Telephone Numbers (Commands 118;119)

4. Programming
496478 53
The system can store telephone numbers up to 31 digits long.
You can use the A key to insert a pause (four seconds).
To enter a number:
1. Enter programming mode (if you are not already there).
2. Key in 115 (or 116) Y at the keypad.
The display shows (for example): 115:Tel No 1_
3. Press Y.
4. Key in the digits of the number. If necessary press D to move the cursor
to the left to edit or delete the number. Press C to move the cursor to
the right.
The display shows (for example): 115: 1234_
5. Press Y.
The keypad gives a double beep and the system stores the number.
Account Number (Command 117)
With SIA Format the system can report alarms using a six digit account
number.
Use leading zeros to pad the account number to the correct length if neces-
sary, for example account 1234 would be 001234.
Downloader Telephone Numbers (Commands 118/119)
Use this option to program up to two separate, 31-digit telephone numbers.
When a connection has been made, the remote PC operator selects the
telephone number which the control unit will call back to (for example home
or office).
You can use the A key to insert a pause (four seconds).
To enter a number:
1. Enter programming mode (if you are not already there).
2. Key in 118 (or 119) Y at the keypad.
The display shows (for example): 118: DL Tel No 1_
3. Press Y.
3. Key in the digits of the number. If necessary press D to move the cursor
to the left to edit or delete the number. Press C to move the cursor to
the right.
The display shows (for example): 118: 1234_
4. Press Y.
The system stores the number.