Technical Support Manual – 05/2018 Rel. 2.1.3 Page 14
Las
Activation or deactivation of the LASER device (if present)
1
Enter the SERVICE mode by pressing [F+P3]
.
2
Press [F+P5] to
enter in PARAMETERS MENU.
3
A password is required to enter this menu.
Enter the password by pressing the keys in
the sequence indicated within 5 seconds, or
the machine will return to SERVICE mode:
1. [P1]
2. [P4]
3. [P2]
4 Browse the list of the menus with [P4]
or [P5] until the option
required is displayed.
5
Press [F+P5] to
activate the LASER device.
6
Press [F+P5] to
deactivate the LASER device.
7 To exit the Parameters Menu, select option
Ret and press [F+P5]
.
To Next Page
Loading...
