Cormach MEC 5 - Illumination LEDs Configuration; Revolution Counter Reset

Technical Support Manual – 05/2018 Rel. 2.1.3 Page 16
iLL

Activation or deactivation of the illumination LEDs (if present)
This menu option allows you to automatically activate or deactivate the illumination LEDs.
This is a double function: if the function is disabled, press keys [F+P5] to enable it and vice-versa.
Description
1
Enter the SERVICE mode by pressing [F+P3]
.
2
Press [F+P5] to
enter in PARAMETERS MENU.
3
A password is required to enter this menu.
Enter the password by pressing the keys in
the sequence indicated within 5 seconds, or
the machine will return to SERVICE mode:
1. [P1]
2. [P4]
3. [P2]
4. [P5]
4
Browse the list of the menus with [P4]
or [P5] until the
option required is displayed.
5
Press [F+P5] to
activate the ILLUMINATION LED. The
ILLUMINATION LED IS ENABLED.
6
Press [F+P5] to
deactivate the ILLUMINATION LED.
7
To exit the Parameters Menu, select option
Ret and press [F+P5]
.