To Next PageTo Next Page
Need help?Do you have a question about the Cornell 6NHTA and is the answer not in the manual?
Steps for taking apart the pump.
Steps for putting the pump back together.
Procedures for disassembling the cutter modification kit.
Procedures for assembling the cutter modification kit components.
Steps for checking and adjusting cutter clearances.
General method for dismantling pump side plates and impeller.
Impeller pulling method for specific pump series.
Impeller pulling method for W and Y series pumps.
Steps for taking apart grease and oil lubed frames.
Steps for putting together grease and oil lubed frames.
Procedures for starting pump with mechanical seal.
Guidelines for examining mechanical seal for wear and leakage.
Steps for removing the mechanical seal.
Procedure for removing the stationary seal seat.
Detailed steps for installing a new mechanical seal.
General| Brand | Cornell |
|---|---|
| Model | 6NHTA |
| Category | Water Pump |
| Language | English |
