Check if Your Vehicle Belts Will
Work With This Car Seat
This is very important because not
all vehicle belts will work with car
seats.
Review pages 18-21 and your
vehicle owner’s manual to fi nd out
what kind of vehicle belt you have
and how to lock a car seat in place.
36
continued on next page
35
1
Place Car Seat Forward-
Facing
in Back Seat
The vehicle seat back must be
upright. The car seat’s back should
be as fl ush as possible against the
vehicle’s seat back.
Before you begin installing the car seat
into your vehicle, did you check:
Your child’s weight and height?
22-50 lb (10.1-22.6 kg) and
29-43 in. (73.6-110 cm)
Your child’s fi t? See page 7.
Do you need to make adjustments to the
harness strap position or the buckle position?
If your vehicle seat’s headrest
interferes with a fl ush car seat fi t,
check your vehicle owner’s manual to
see if the headrest can be removed,
adjusted, or if there are other possible
seating locations to use the car seat.
2
3
Loosely Attach Tether Hook to
Vehicle’s Tether Anchor
Check your vehicle owner’s manual
for specific tether (top anchorage)
anchor locations.
Locate Forward-Facing
Belt Path
4
Vehicle Belt + Tether Install
To Next Page
