19
SETTING OVEN TEMPERATURE CALIBRATION
This oven may cook differently than the one it replaced. Use the oven for a
few weeks to become more familiar with it before adjusting the thermostat
settings. Do not use thermometers, such as those found in grocery stores, to
check the temperature setting of your oven. These thermometers may vary
20–40 degrees.
DISPLAYING SYSTEM FIRMWARE VERSION
1. Press SETTINGS.
2. Press repeatedly to select "UEr" in the display.
3. Press START/OK.
4. Press START/OK when finish.
1. Press SETTINGS.
2. Press repeatedly to select "CAL" in the display.
and +30°F (-17°C and +17°C).
• +30°F (+17°C) will raise the oven temperature and cook food more.
• -30°F (-17°C) will reduce the oven temperature and cook food less.
5. Press START/OK to confirm.
TURNING ON/OFF DEMO MODE
Demo Mode allows user to explore various oven features and options and
practice using the oven control without enabling any oven heating elements
while the unit is on the showroom floor or in a retail store.
1. Press SETTINGS.
2. Press repeatedly to select "dIS" in the display.
3. Press START/OK.
4. Press
5. Press START/OK to confirm.
to toggle and select On or Off.
to adjust the offset temperature between -30°F
or
3. Press START/OK.
4. Press/Hold or
or
or
or
To Next Page
