23
NOTE:
• It is normal for the cooktop elements to cycle on and off during cooking,
even on higher settings.
COOKING AREAS
The cooking areas on your range are identified by permanent circles on the
glass cooktop surface.
For the most efficient cooking, fit the pan size to the element size. Pans should
not extend more than 1/2" to 1" (1.3 cm to 2.5 cm) beyond the cooking area.
When a control is turned on, a glow can be seen through the glass cooktop
surface.
NOTE:
HOT SURFACE INDICATOR
The hot surface indicator light glows and indicates that one or more cooktop
elements are still hot. When the hot surface indicator turns off, the glass
surface may still feel slightly hot to touch.
• The hot surface indicator light glows 30 seconds after an element is
turned on or when the surface temperature reaches 150°F (65°C).
• The hot surface indicator light remains on after the element is turned
off and until the surface has cooled to approximately 150°F (65°C).
Hot surface
indicator
light
To Next Page
Loading...
