Camera mode settings:
PHOTO SIZE: Press the ▼or ▲ button to highlight
Photo Size in yellow.
Press the ► arrow repeatedly to toggle between
3mp, 5mp, 8mp, or 12mp. Press OK once the
desired option shows in the white box. Keep in
mind the higher the MP, the larger the file and the
faster your SD card can fill up.
PHOTO BURST: Your camera can take a 1-10 shot
burst every time the PIR is triggered to take a
photo. The photo shot burst only sends wirelessly
the first photo of the series burst.
Press the ▲ or ▼ buttons to highlight the PHOTO
BURST option: To set this function, press the
►repeatedly to show the 1 Photo, 2 Photo, 3 Photo
(up to 10 Photo) option. Press OK to save the
desired setting.
To Next Page
Loading...
