TRIGGER INTERVAL: Allows you to customize how
often the camera can be allowed to take a photo.
Press the ▲ or ▼ arrow to highlight the Trigger
Interval option. Repeatedly press the ◄ or ► to
adjust the timing. Options are 5-60 seconds (5
second increments) and 1-60 minutes. Once you
have chosen your desired trigger interval, press the
OK button to save the setting.
Note: We recommend at least a 30 second trigger
interval with wireless cameras.
TIP: You can press and hold the ◄ or ► button to
speed through the settings rather than repeatedly
pressing the button.
TIME LAPSE: Press the ▼ and ▲ arrow to highlight
the Time-Lapse option. This option allows your
camera to automatically take a photo without being
triggered by the PIR. If you already set the
Sensitivity to OFF, then the camera will only take
photos when the Time-Lapse option is on. If you
To Next Page
Loading...
