101
Note: If the web page still does not open, press the “
” icon on the right of the address field to display this page
in an IE based-tab.
8. Fill in your correct user name and password to log in. and the following screen will appear.
Appendix 9 How to Use Auto ID-"Plug n play" Quick Guide
1. The ID number of each product is set in the factory. From the toolbar, click “System Setting”,
and select “user”. The screen will display the user management menu, and the DVR’s ID
number will appear at the top of the screen (as in the following illustration):
To Next Page
Loading...
