45
NETWORK TYPE: From this field, select from different mobile networks, including 3G, 2.5G,
2.75G and WiFi; press “
” to save a new network.
Explanation: Make sure to connect the DVR to the Internet before setting the DVR port
number, and make sure the server port is not equal to network menus.
Note: It is only possible to view one channel at one time when viewing DVR videos from a
mobile phone. The speed of the display depends on the speed of the Internet connection.
5.5.6 IP Access Setup
Move the cursor over “IP access setup” (the icon will be highlighted when selected), and press
“Enter” to enter the IP access setup menu.
IP access: The options for IP access settings are: “disable,” “forbidden,” and “allow access.”
Press “
”to confirm a setting.
5.5.7 ESMS Settings
Move the cursor to “SMS Setting” (the
icon will be highlighted when selected)
and press “Enter” to access the SMS
settings menu.
Interval: From this field, choose the
interval of time for sending alarm SMS
messages.
User Name, Sensor PWD: Open an
Internet browser, and in the address field,
enter
http://www.textmagic.com; follow the
instructions on the website to register the DVR and the phone number being used for SMS
services. Remember the username and sensor password (“sensor PWD”) chosen. The username
and sensor password used here will be the same as in the ones registered on the website.
Phone: Enter a phone number in this field in order to receive SMS messages when an alarm is
triggered.
To Next Page
Loading...
