67
this page, users can set up the save path for local settings; in the “Record Save Path” field, they
can create a save path for recordings, in the “Frame Save Path” field, they can create a save
path for video/still images, and in the “File Save Path” they can create a save path for
downloads. Clicking “
” will set up the respective save path.
6.5.8 Logout
Click “Logout” to log out of the system.
7. Wap Connection
The digital video recorder can also be remotely accessed by using a Web browser installed on a mobile
phone that supports xHTML and MJPEG file formats, and has a screen resolution of 320x240 or
higher. To access the digital video recorder, follow these instructions:
1. Make sure the digital video recorder is connected to the Internet.
2. Open the Internet browser on the mobile phone and enter the IP address of the DVR. For
example, if the IP address of the DVR is 192.168.1.157 and its web port is 86, enter
http://192.168.1.157:86/wap.html
in the address field, and then click “ENTER.”
3. A login interface will automatically appear; enter the username and password in their
respective fields, and then click “login.” The “username” and “password” fields should be left
blank if the password for the DVR has not been set; if a password for the DVR system has
been enabled, the username and password entered on the mobile phone Internet browser should
be the same as those used to enter the DVR system from a local computer.
To Next Page
Loading...
