16
Audio Connection---(optional)
The audio input interface is a standard RCA socket, 2Vp-p, 600 Ω.
Keep the audio signal cable away from strong electromagnetic and electric interference.
Monitor
Connect the main output connector to a monitor or a TV screen. Use a BNC-to-RCA
converter, if needed, to work with the Audio/Video RCA cable.
Power
Use the 12V DC adapter supplied for connecting your DVR device to the power source.
Alarm Input / Output----(optional)
Connect the Alarm In 1-4/Alarm In 1-16 to N. O. (Normally Open) or N.C. (Normally
Closed) alarm connectors to one ground connection. Connect the Alarm Out to the
corresponding connections and ground accordingly.
For detailed description please see Section 5.6.6 I/O Alarm
4ch/8ch 16ch
Ethernet
For remote access to the video images from your cameras via LAN or Internet, connect
a standard RJ-45 twisted-pair Ethernet cable to the Ethernet port.
USB
Use this port for connecting the mouse, USB flash drives, USB portable HDDs, USB
portable DVD Recorders to the DVR (for the list of compatible HDDs see Appendix 2
;
for the list of compatible DVD Recorders see Appendix 3
). The USB mouse can be hot
plugged.
3.5.2 Installing Hard Disk Drives (HDDs)
NOTE: The device only supports the FAT32 file system on USB devices.
Before you can record onto your HDD, it must be formatted by the DVR
system because standard PC formatting is not compatible with the DVR. It can
be done through the “Maintenance” tab of the main menu in the toolbar. Refer
to Section 5.2.5 HDD
for a detailed description of this process. Depending on
the size of your HDD, the formatting process can take up to several minutes.
To Next Page
Loading...
