CP Plus 4/8/16 Channel DVR - 3.2 Back Panel

11
• IR Window ( ): Infrared sensor for remote control.
• USB Connector: Use these USB ports to connect backup devices (i.e. flash drives, USB
DVD recorders, etc.) or a mouse to the DVR.
• Number 0-9 Buttons/
: Using these buttons, you can choose to display video on your
monitor either as a full-screen view of each of the cameras individually (Channels 1
through 9), or you can press the “
” button in combination with other buttons to
select channels between Channels 10-16. For example, if you want to display Channel
12 in full-screen mode, press button “
” and button “2”, then Channel 12 will be
displayed full screen.
NOTE: On live view, press the
button, the button, or the numerical button 10 times
when there is no toolbar, and this will switch the main menu between CVBS video output and
VGA video output.
3.2 Back Panel (The following are diagrams of ALL of the available DVR models;
not all models have the same layout or features. For reference, find the diagram of the
model you have purchased.)
4-CH(1U)：
4-CH (NON-1U)
7 6 5 4 3
9 1 2
4-CH (NON-1U)
7 6 5 1 3
9 1 17 2 4