66
OR DEL” to enter the user management interface. Once a password has been enabled, this
interface can only be accessed by the Administrator. The Administrator can add new users or
delete any users at his or her discretion.
Privacy Settings: From the sidebar on the left, click “User Manager,” and then select
“MODIFY PASSWORD OR PRI” to enter the privacy settings interface. Once a password has
been enabled, this interface can only be accessed by the Administrator. The Administrator can
use this page to set and or modify the system password, local permissions, and remote
permissions.
6.5.7 Local Settings
From the sidebar on the top, click “Local Setting” to enter the local settings interface. From
To Next Page
Loading...
