54
6.4 Control Download and Installation
After the aforementioned settings have been adjusted and saved, open the Internet browser,
enter http://192.168.1.X
(192.168.1.X is the set IP address of the DVR) and confirm. If the http
port of DVR setting has been changed (if it is not “80”), it will be necessary to add a “:”
followed by a port number. For example, assuming that the current port number is “P”, enter
“http://192.168.1.X:P
”, to correct the problem. Then, click “If your browser does not support
the ActiveX to download, please click here”, and the network will download and install the
control automatically.
After connecting to the internet, Internet Explorer (or other Internet browser being used) will
automatically download the file to the computer as follows.
The system will automatically enter the GUI as follows.
Select the English interface from the upper left side. Enter the correct password if a password
has been enabled. The password is the same as the one set in DVR.
USER ID: In this field, enter a username. The Administrator has all permissions, but other
users have limited permissions. The Administrator can change each user’s remote permissions
from the User Management menu.
PASSWORD: The password is as the same as the password for the DVR.
NETWORK: LAN/WAN
Note: If the device is connected to the WAN, the IP address should be a public IP address.
6.5 Operation Interface
Options in the main interface include “LIVE,” “REPLAY,” “REMOTE SETTING,” “LOCAL
SETTING,” and “LOGOUT.” Click any option to access it.
6.5.1 Live
Click “Live” to enter the interface as follows (in some cases, it will be necessary to click
to open images from the DVR).
To Next Page
Loading...
