46
5.5.8 FTP Settings
Move the cursor to “FTP Setting” (the tab
will be highlighted when selected) and press
“Enter” to access the FTP settings menu.
Port, User name, Password: Install the
FTP server first, then register, and remember
the port, username, and password. Entered
the port, username, and password used here
will be the same as the ones entered on the
server.
Host name: The IP address of the computer on which the server is installed.
5.5.9 Other Settings
Move the cursor to “Other Settings” (the icon
will be highlighted when selected) and press
“Enter” to access the “Other Settings” menu.
Note: The Auto ID is used for connecting the
DVR to an Internet browser interface. For
detailed instructions, refer to Appendix 6.
5.6 Alarm
Move the cursor to “ALARM”(the icon will be highlighted when selected) and press “Enter” to
access the alarm settings menu.
5.6.1 OUTPUT
This function sets the output time for an I/O alarm
when an alarm is triggered. The options are:
“OFF”, “5s,” “10s,” “30s,” and “60s.” When the
“OFF” option is chosen, the alarm will not be
triggered by any activity.
5.6.2 DURATION
This function sets the duration of the recording time after alarm recording is activated.
The options are: “30s,” “1 min,” “2 min,” and 5 min”.
5.6.3 BUZZER
This function sets the length of time that the buzzer will sound when the alarm is triggered.
Options include: “OFF,” “5 seconds,” “10 seconds,” “30 seconds,” and “60 seconds.” If the
“OFF” setting is selected, the buzzer will not be triggered by any activity.
To Next Page
Loading...
