22
Method 1: Playback by Date
Date input: Adjust the date and time to match the recording you are searching for: first, select
“TIME” and press “Enter” to input numbers directly to set the year, month, and date; next,
input the time in the next field, and click “►”. A window that reads “CHOOSE PLAYBACK
CHN” (see the following figure on the right) will automatically appear; in this window, choose
channel of the video to be played, and click “►”. If only one channel is selected, the video
from that channel will be displayed in full-screen mode. If two or more channels are selected,
the videos from the selected channels will be displayed simultaneously over four frames.
.
Instructions:
CHN: CH1, CH2, CH3, CH4 and ALL (4 CH); CH1, CH2, CH3, CH4, CH5, CH6, CH7, CH8
and ALL (8CH);
CH1, CH2, CH3,CH4 ,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14,CH15,CH16
and ALL(16CH) .
MONTH: This option will show all the recordings in a given month. A green background on
the calendar indicates normal recording; a red background indicates alarm recording, and a gray
background indicates that there was no recording. Click any date in this frame to search by the
recording status of that day, and the search results will be shown in the date frame.
DATE: This option will show all the recordings and their statuses on the selected day, and the
recorded files in any period can be displayed by clicking on their corresponding period.
Method 2: playback by recording status:
Input the date, click “search” and the recording status on that date will be displayed.
Instructions:
1. “FILE LIST”: “CHN” shows which channel the file was recorded under, “TIME” shows the
recording time, and “SIZE” is the size of this file (listed in MB). A red list indicates this
recording file is an alarm recording file, and a black list indicates this file is a normal
recording file. Pressing the “SELECT” button will export the selected files to a USB
storage device.
To Next Page
Loading...
