84
Save as Favorite: Saves settings for future usage
User name: The device ID name/number of the DVR
Password: The password set for entering the DVR system
Server: The public IP address or dynamic domain name of the DVR
Port: The server port of the DVR for remote access viewing via mobile phone－ the default is
“10510”.
Channel Count: Using this field, set the number of DVR channels accessible from via mobile
phone.
Default channel: Using this field, set the default channel to be displayed when the mobile
phone is connected to the DVR for remote access viewing.
Record Name: Use this field to save the name of the recording.
①After changing settings, always press “SAVE” to save the information in the designated
folder. Later, it will be easier to find the record in the file.
After ② saving settings, press “setting” to return to the main interface.
Next, press “connect” on the main interface, and it will connect to the server. From this menu,
users can also switch channels, operate PTZ controls, including zoom/iris/focus, use the
phone to capture still images, and display videos in full-screen mode. See following
illustration for more details.
To Next Page
Loading...
