92
Explanation of Toolbar Buttons:
Choose Channel：This function switches the channel being viewed. It may only be enabled
AFTER connecting to the DVR.
: These keys move the PTZ up, down, left, and right.
：These keys can be used to adjust the PTZ zoom, focus, and
iris settings.
: Pressing this key will display the video in full-screen mode; pressing it again will exit
full-screen mode.
: Pressing this will capture a still image of the selected video frame.
④ Connecting to the DVR
To connect to the server, press the “Menu” button on the mobile phone, and the following
screen (the “Menu” screen on the left) will appear. Select “Connect” and the “Connect” tab will
be highlighted. Then, press the “Enter” button to connect to the server.
Menu Video Playback
After clicking “Enter,” a screen similar to the preceding “Video Playback” screen (on the right)
will appear. From this interface, users can switch channels, adjust PTZ controls, capture still
images of video frames, and view videos in full-screen mode.
⑤System Help Interface
After configuring the settings, return to the main interface and press “Help” to enter the “Help”
interface.
⑥ Exit
To exit, go back to the “Menu” interface and press “Exit.” A window asking, “Do you want to
exit?” will then appear; press “yes” to exit the program, or press “no” to return to the “Menu”
interface (see the following screenshot):
To Next Page
Loading...
