Cradlepoint ARC CBA850 - Page 127

uptime: 0:35:13
FW: v4.4.0
eth0: 10/100/1000 Ethernet Switch: connected
usb3: MC200P: connected
mstatus: Get modem status*
• Syntax: <password>,mstatus,[port,]
• Example: 1234,mstatus, //return status of highest priority modem
• Example: 1234,mstatus,usb1, //return status of modem plugged into port usb1
This command returns info about the indicated modem’s status. The resulting data reflects the modem model number, service
type, and connection status and values.
Example of response:
Model: MC200P
Service: HSPA+
SIM Status: READY
RSSI: -62 dbm
ECIO: -4
APN: wwan.ccs
IP Addr: 166.136.142.172
mreboot: Reboot the modem*
• Syntax: <password>,mreboot,[port,]
• Example: 1234,mreboot, //This will reboot the highest priority modem.
• Example: 1234,mreboot,usb1, //This will reboot the modem on port usb1
apn: Set the APN on the modem (for SIM-based modems)*
• Syntax: <password>,apn,<new APN>,[port,]
• Example: 1234,apn,myapn@apn.com, //set APN of highest priority modem
www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299