• Example: 1234,apn,myapn@apn.com,usb1, //set APN for modem in port usb1
userpass: Set the modem's authentication username and password*
• Syntax: <password>,userpass,<username>,<userpassword>,[port,]
• Example: 1234,userpass,joe,mypassword, //set information of highest priority modem
• Example: 1234,userpass,joe,mypassword,usb3, //set information on modem in port usb3
simpin: Set the SIM's PIN*
• Syntax: <password>,simpin,<pin>,[port,]
• Example: 1234,simpin,5678, //set simpin in highest priority modem
• Example: 1234,simpin,5678,usb2 //set simpin in modem on port usb2
log: Return a portion of the router log
• Syntax: <password>,log,[start,]
• Example: 1234,log, //return the first 10 items of the log (items 0 through 9)
• Example: 1234,log,10, //return items 10 through 19 of the log
• Example: 1234,log,20, //return items 20 through 29 of the log
Sending log information via SMS messages likely results in several resulting texts. Please be aware of the costs of text
messages on the modem’s account, and use this command only if necessary.
* The “port” parameter is optional. It specifies which port to perform the action on. If not given, the action will happen on the highest priority modem.
To Next Page
