Trap community string: The trap notifications will be returned to the trap server using this SNMPv1 trap community name.
Address for trap server: Enter the address of the host system that you want trap alerts sent to.
Trap server port #: Enter the port number that the remote host will be listening for trap alerts on. (Default: 162)
8.5.2 System Information
System information via SNMP is Read-Writable by default. However, if a value is set here, that field will become Read-Only.
System Contact: Input the email address of the system administrator.
System Name: Input the router’s hostname.
System Location: Input the physical location of the router. This is simply a string for your own information.
To Next Page
Loading...
