SCHEDULE
Set up a schedule for this network interface. This allows an interface to be enabled or disabled during specific hours of a day. For
example, use this to limit the network to business hours.
Schedule Service: (Default:
Disabled.) Select to enable. This
will open a configurable chart for
setting the schedule.
Each hour of the week is
represented by a black or gray
square. Black represents disabled,
while gray represents enabled.
Hover over a square to reveal the
hour it represents. Click on the
squares to toggle between black
and gray.
In the example shown, the network
is enabled from 8-5 on Monday
through Friday, but disabled at all
other times.
To Next Page
Loading...
