CRADLEPOINT CBR400| USER MANUAL Firmware ver. 3.3.0
© 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 35
Local Networks: “Detailed Info‖ links to Network Settings → WiFi / Local Networks.
Clients: The number of current clients.
For each network, the following information is displayed:
Network Name: IP Address/Netmask
o Route Mode: NAT (Network Address Translation), Standard (NAT-less), IP Passthrough, Hotspot, or
Disabled.
o Access: Admin Access, LAN Isolation, UPnP (Universal Plug and Play), and/or DHCP.
To configure a network, see Network Settings → WiFi / Local Networks.
WiFi Networks: “Detailed Info‖ links to Network Settings → WiFi / Local Networks.
WiFi Radio: Channel: 1-11. Transmit Power (Expressed as a percentage).
For each WiFi network, the following information is displayed:
SSID: Service Set Identifier, an identifier for a wireless network.
o Security: WPA2/WPA1/WEP Personal/Enterprise or Open; Isolated Clients
o Network: The name of the local network.
To configure WiFi network settings see Network Settings → WiFi / Local Networks.
To Next Page
Loading...
