Cradlepoint CBR400 - WiFi; Local Networks

CRADLEPOINT CBR400| USER MANUAL Firmware ver. 3.3.0
© 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 67
6.7 WiFi / Local Networks
This section is used to configure the
settings for networks created by your
router. Note that changes made in this
section may also need to be duplicated
on devices that you want to connect to
your networks.
For example, if you change a LAN‘s IP
address, devices within that network will lose
connection. They will have to reconnect to the
network.
The CBR400 includes these options:
 2 SSIDS
 VLAN (virtual LAN)
 NAT-less routing
The user can set up multiple networks,
each with its own unique configuration
and its own selection of interfaces.
Each local network can be attached to
any of the following types of interfaces:
 WiFi
 Ethernet
 VLAN
For example, one network might be just an isolated WiFi hotspot for guests, while another might be the main network with
administrative access, two Ethernet ports, a password-protected WiFi SSID, and a VLAN interface.