CRADLEPOINT CBR400| USER MANUAL Firmware ver. 3.3.0
© 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 80
6.7.4 WiFi Settings (Advanced Mode only)
When you select the Wireless (WiFi) Networks
Settings tab in the Local Network Interfaces
section, you have several additional options for
configuring your wireless LANs under the WiFi
Settings heading.
Random Channel: Select to randomize the WiFi
channel. This makes it less likely that the wireless
signal from this router will conflict with another
router in the same area.
Optimize WiFi/WiMAX coexistence: (Shows if
Random Channel is selected) Setting this will
lessen any possible conflict with WiFi and an
attached WiMAX modem. If a WiMAX modem is
attached to the router when the WiFi is enabled,
the WiFi channel and transmit power will be set to
levels that optimize the performance of the WiMAX
modem. If no WiMAX modem is attached, then
default channel and power settings will be used
even if this is selected.
To Next Page
Loading...
