Do you have a question about the Craftsman 247.881721 and is the answer not in the manual?
Brand | Craftsman |
---|---|
Model | 247.881721 |
Category | Snow Blower |
Language | English |
Read, understand, and follow all instructions before operating.
Inspect the area, wear appropriate clothing and footwear.
Extreme care is needed due to flammability and explosive vapors.
Depicts and describes safety symbols used on the product.
Steps to unpack the snow thrower from its shipping carton.
Includes chute clean-out tool, tire pressure, and skid shoe adjustments.
Adjusting skid shoes for different surfaces to control height.
Adjusting the chute direction and tilt for snow discharge.
How to adjust the auger control cable for proper engagement.
Explains the different speed and direction settings for the shift lever.
Importance and function of the ignition key for starting and safety.
Using choke and throttle for starting and engine speed regulation.
Procedures for starting the engine using recoil or electric starter.
Proper procedure to shut down the snow thrower after use.
Recommended intervals for checking and servicing components.
Procedure to check and maintain the engine oil level.
Steps for draining and refilling the engine oil.
How to inspect, clean, gap, and replace the spark plug.
Lubrication points and procedures for various components.
Covers adjustments for shift cable, drive control, and chute bracket.
Procedures for replacing the auger and drive belts.
Steps for removing and replacing the friction wheel.
Steps to prepare the engine for long-term storage, including draining fuel.
Procedures for protecting the snow thrower from rust and damage during storage.
Lists common issues and their remedies for engine and drive problems.
Outlines owner's responsibilities and warranty terms.
Details the duration and scope of the emission control system warranty.
Specifies owner's duties for maintenance and proper use.
Covers warranty for emission-related parts over two years.
Lists specific emission control parts covered by the warranty.