EasyManua.ls Logo

Craftsman 580.752521 - Lubricate O-Rings; Assembly; Operation

Craftsman 580.752521
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FreshStart@ Fuel Cap
The FreshStart@fuel cap (A) is designed to hold a
cartridge (B) which contains fuel preserver. Adding fuel
preserver helps keep fuel fresh and carburetors clean for
easierstarting aii season long. The FreshStart@fuel cap, if
equipped with a cartridge, automatically drips concentrated
fuel preserverinto your fuel tank so you don't have to add it
yourself.
NOTICE FreshStart@ fuel preserver cartridge is available as
an optional accessory, retail item 7133386. it is not included
with the pressurewasher. Contact the original equipment
manufacturer, retailer,or dealerto obtain a cartridge
designedfor the FreshStart@ fuel cap installed on this
engine.
Readand follow all instructions andwarnings given in the
FreshStart@ fuel preservercartridge package.
Lubricate O-Rings
Lubrication of o-rings is extremely important for installation
and operation. The useof a lubricant (petroleum or synthetic
grease)during assembly helps seat o-rings properly and
provides an improved seal. It also helps protect the o-ring
from damageby abrasion, pinching or cutting and extends
the life of the o-ring.
NOTICE ALWAYSapplya small amount of lubricant on
o-rings prior to assembling the garden hoseto the pump (C),
high pressure hose(D), spray gun (E), and nozzle
extension(F).
Lubricateall connectionsshownbelow, following these
instructions:
1. inspect and clean connecting surfaces prior to
lubrication and assembly.
2. Use lubricants sparingly during assembly; a light film is
all that is required.
3. Use a small brush or cotton swab to apply grease
directly to o-rings wherethey are not accessible(QC
fitting, M22 fitting).
10

Related product manuals