EasyManua.ls Logo

Craftsman 580.752521 - Pressure Washer Rinsing; Cleaning Detergent Siphoningtube; Automatic Cool down System (Thermal Relief)

Craftsman 580.752521
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Pressure WasherRinsing
ForRinsing:
1. Select and changeto desired spray pattern nozzleon
selector nozzle.SeeHow To UseSelector Nozzle.
2. Keepspray gun a safedistance from areayou plan to
spray.
A WARNING Kickbackfrom spray gun could causeyou
to fall resulting in death or serious injury.
Operatepressurewasherfroma stablesurface.
Beextremelycarefulif youmust usethe pressurewasherfrom
a ladder,scaffolding,oranyothersimilarlocation.
Firmlygraspspraygunwith bothhandswhenusinghigh
pressuresprayto avoidinjurywhenspraygunkicksback.
3. Apply a high pressure spray to a small area and then
checksurface for damage, if no damageis found, you
can assumeit is okay to continue rinsing.
4. Start at top of areato be rinsed, working down with
same overlapping strokes asyou used for cleaning.
Cleaning Detergent SiphoningTube
If you used the clear detergent siphoning tube, you must
flush it with clean water before stopping the engine.
1. Placedetergent siphoning tube/filter in a bucket full of
cleanwater.
2. Select and changeto SOAPspray pattern nozzleon
selector nozzle.See How To UseSelector Nozzle.
3. Flushfor 1-2 minutes.
4. Shut off engine following instructions How to Stop
Pressure Washerand turn off water supply.
5. ALWAYSpoint spray gun in a safe direction push red
button and squeezespray gun trigger to releaseretained
high water pressure.
,A. WARNING The high pressure stream of water that
this equipment produces could cut through skin
and its underlying tissues, resulting in serious
injury and possible amputation.
Spray gun traps high water pressure, even when engine is
stopped and water is disconnected, which could result in
serious injury.
Keephighpressurehoseconnectedto pumpandspraygun
whilesystemis pressurized.
ALWAYSpointspraygunin safedirection,pressredbutton
andsqueezesprayguntriggerto releasehighpressure,every
timeyoustopengine.
Automatic Cool Down System(ThermalRelief)
If you run the engine on your pressure washer for
3-5 minutes without pressing the trigger on the spray gun,
circulating water in the pump can reachtemperatures above
125°F.The systemengagesto cool the pump by discharging
the warm water onto the ground.
16

Related product manuals