31
ENGINE:
Brand Briggs & Stratton
Model Series Snow Series
Gross Torque* 5.25 T.P. @ 3060 rpm
Type 4-Cycle - OHV
Displacement 9.0 cu in. (148 cc)
Bore 2.562 in. (65 mm)
Stroke 1.750 in. (45 mm)
Starting System 110V Electric, Recoil
Alternator 60W AC
Spark Plug Gap 0.030 in. (0,76 mm)
Spark Plug 697451
Oil Capacity 16 oz (0,53 liters)
Hydraulic Fluid Synthetic 5W30
Fuel Tank Volume 2.0 qts (1,9 liters)
Ignition System This spark ignition system complies with Canadian standard ICES-002.
AUGER:
Clearing Width 22 in. (55,9 cm)
Intake Height 12 in. (30,5 cm)
Auger Diameter 9 in. (22,9 cm)
CHUTE:
Chute Deflector Manual
Chute Rotation 190° (3.5 Turns)
DRIVE SYSTEM:
Drive Type Auger Propelled
Tire Size 7.0 x 1.5 in. (17,8 x 3,8 cm)
Engine Power Rating Information
*The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engineers) code
J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and corrected in accordance with
SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower values are derived at 3600 RPM. Actual gross en-
gine power will be lower and is affected by, among other things, ambient operating conditions and engine-to-engine variability. Given
both the wide array of products on which engines are placed and the variety of environmental issues applicable to operating the equip-
ment, the gas engine will not develop the rated gross power when used in a given piece of power equipment (actual "on-site" or net
power). This difference is due to a variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling,
carburetor, fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine
variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this
Series engine.
SPECIFICATIONS
To Next Page
Loading...
