Positioning of the oil lter
Turn the new oil filter onto the engine, thereby follo-
wing the instructions given on the filter housing.
Adding new oil lter
Fill the engine with lubrication oil with specifications
as outlined on page 13 through one of both filling
entries.
Use a funnel in order to avoid spilling of oil over the
engine.
Have the engine idling during a few moments and
check after leaks.
Stop the engine and check the oil level by means of
the dipstick, after about 5 minutes’ time.
Positioning of the oil lter
Maintenance and inspection 11
27craftsman marine diesel engines CM2.12 , cm2.16 / cm3.27
To Next Page
