EasyManua.ls Logo

Craftsman CM2.16 - Fuel Filter and Lift Pump Maintenance

Craftsman CM2.16
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Remove the fuel lter
Close-off the fuel supply to the engine. Remove the
entire filter with the aid of a special tool. It is possible
that the filter still contains some fuel, which please
collect and treat it in accordance with the environ-
mental directives in your country.
Do not smoke when working at or
around the fuel system and avoid open
fire.
Fit the fuel lter
Clean the surface to touch the engine before fitting
the filter. Grease the rubber ring with clean engine oil.
Fill the filter with clean diesel fuel. Position the filter
against the filter housing and tighten it with one half
to three quarters of a turn.
Clean the filter of the fuel lift pump and reopen the
cock of the fuel supply.
Cleaning the lter of the fuel lift pump
Consult your dealer.
Fuel lter
Maintenance and inspection 11
29craftsman marine diesel engines CM2.12 , cm2.16 / cm3.27

Table of Contents