Mountings,hose connections, fasteners
11 Maintenance and inspection
Check the exible engine mountings
Use a suitable tool to make sure that the bolts on the
engine bed and the nuts on the spindle are securely
tightened. The rubber element must not show any
fissures.
Should this be the case, then the engine mounting
must be replaced.
Make sure as well that the damper
element is still sufficiently flexible. If not
so, the engine must be realigned.
Verify the hose connections
Inspect all hoses of the cooling system and of the fuel
system. Check for loose connections or cracks and
fissures in the rubber hoses. In such case the hose
must be replaced.
Verify the fasteners
Make sure that all and sundry bolts, nuts and screws
are well tightened.
30 craftsman marine diesel engines CM2.12 , cm2.16 / cm3.27
To Next Page
