Need help?Do you have a question about the Craftsman CM2.16 and is the answer not in the manual?
Details about the Craftsman Marine model data tag, its location, and purpose.
Information on the location of the Mitsubishi engine serial number.
Lists the standard components included with the engine.
Essential directives for optimal engine operation, lifespan, and economy.
Identifies engine components on the service and starter motor sides.
Details on the engine's identification tag, its location, and Mitsubishi serial number.
Survey of warning pictograms used throughout the manual.
Guidance on paying attention to symbols and reading instructions.
Warnings regarding safety risks for man or material.
Instructions for filling the engine with lubrication oil before commissioning.
Instructions for filling the gearbox with the correct lubricant type and quantity.
Procedure for filling and checking the engine's cooling liquid level.
Overview of standard instrument panels Alfa 10E and Alfa 20E.
Explanation of gauges (tachometer, voltmeter) and monitoring lights.
Step-by-step guide for starting the engine, including checks and pre-heating.
Procedure for starting, stopping, and using monitoring lights.
Overview of maintenance tasks based on operating hours or time intervals.
Instructions for checking the engine lubrication oil level and adding oil.
Procedure for checking coolant level and replacing cooling liquid.
How to check and clean the cooling water strainer to prevent overheating.
Procedures for draining the water separator and bleeding the fuel system.
Instructions for changing engine lubrication oil and fitting the new oil filter.
Steps for correctly positioning the oil filter and adding new engine oil.
Instructions for checking the oil level and draining/adding oil to the gearbox.
Procedures for removing, fitting, and cleaning the fuel filter and lift pump.
Inspection of flexible engine mountings, hose connections, and fasteners.
Guide to inspecting, verifying tension, and tensioning the V-belt.
Procedure for running the engine with a protective fuel mixture during winter.
Recommendations for winterizing the engine lubrication oil system.
Steps to winterize the raw water and inner cooling systems, including antifreeze.
Instructions for winterizing the electrical system and fuel filters.
Steps for preparing the engine for the new season, including fuel, battery, and system checks.
Verifying system integrity and starting the engine after seasonal preparation.
Troubleshooting for starter motor problems and engine not responding.
Troubleshooting for irregular cycles, stopping, or failing to reach max RPM.
Troubleshooting for overheating, low oil pressure, and excessive oil consumption.
Troubleshooting for fuel consumption, and blue/black/white exhaust smoke.
Technical specifications for CM2.12, CM2.16, and CM3.27 engine models.
Details on gearbox, protection, alternator, instrument panel, and cooling systems.
Recommendations for engine oil type, capacity, and gearbox lubricants.
Fuel specifications for summer/winter and cooling liquid anti-freeze concentrations.
Diagrams showing overall dimensions and connection points for CM2.12/CM2.16.
Diagrams showing overall dimensions and connection points for CM3.27.
Details about the Craftsman Marine model data tag, its location, and purpose.
Information on the location of the Mitsubishi engine serial number.
Lists the standard components included with the engine.
Essential directives for optimal engine operation, lifespan, and economy.
Identifies engine components on the service and starter motor sides.
Details on the engine's identification tag, its location, and Mitsubishi serial number.
Survey of warning pictograms used throughout the manual.
Guidance on paying attention to symbols and reading instructions.
Warnings regarding safety risks for man or material.
Instructions for filling the engine with lubrication oil before commissioning.
Instructions for filling the gearbox with the correct lubricant type and quantity.
Procedure for filling and checking the engine's cooling liquid level.
Overview of standard instrument panels Alfa 10E and Alfa 20E.
Explanation of gauges (tachometer, voltmeter) and monitoring lights.
Step-by-step guide for starting the engine, including checks and pre-heating.
Procedure for starting, stopping, and using monitoring lights.
Overview of maintenance tasks based on operating hours or time intervals.
Instructions for checking the engine lubrication oil level and adding oil.
Procedure for checking coolant level and replacing cooling liquid.
How to check and clean the cooling water strainer to prevent overheating.
Procedures for draining the water separator and bleeding the fuel system.
Instructions for changing engine lubrication oil and fitting the new oil filter.
Steps for correctly positioning the oil filter and adding new engine oil.
Instructions for checking the oil level and draining/adding oil to the gearbox.
Procedures for removing, fitting, and cleaning the fuel filter and lift pump.
Inspection of flexible engine mountings, hose connections, and fasteners.
Guide to inspecting, verifying tension, and tensioning the V-belt.
Procedure for running the engine with a protective fuel mixture during winter.
Recommendations for winterizing the engine lubrication oil system.
Steps to winterize the raw water and inner cooling systems, including antifreeze.
Instructions for winterizing the electrical system and fuel filters.
Steps for preparing the engine for the new season, including fuel, battery, and system checks.
Verifying system integrity and starting the engine after seasonal preparation.
Troubleshooting for starter motor problems and engine not responding.
Troubleshooting for irregular cycles, stopping, or failing to reach max RPM.
Troubleshooting for overheating, low oil pressure, and excessive oil consumption.
Troubleshooting for fuel consumption, and blue/black/white exhaust smoke.
Technical specifications for CM2.12, CM2.16, and CM3.27 engine models.
Details on gearbox, protection, alternator, instrument panel, and cooling systems.
Recommendations for engine oil type, capacity, and gearbox lubricants.
Fuel specifications for summer/winter and cooling liquid anti-freeze concentrations.
Diagrams showing overall dimensions and connection points for CM2.12/CM2.16.
Diagrams showing overall dimensions and connection points for CM3.27.
To Next Page
General
