1. Open the fuel supply cock.
2 Charge the battery (ies), if necessary.
3. Connect the battery cables.
4. Verify that the cover of the raw water cooling
strainer is tightened well
5. Verify the tightness of the raw water pump cover
and of all drain plugs (see page 22).
6. If you have disconnected any hoses before winter
storage, these must all be connected again and
tightened well.
13 Preparations for the new season
34 craftsman marine diesel engines CM2.12 , cm2.16 / cm3.27
5.
To Next Page
