Page 20April, 1999
SNACK/REFRESHMENT CENTER PROGRAMMING GUIDE
1670002
SET UP CUP SIZES
1. Press then until the display shows
CUP
=
X OZ
. "X" is
the currently selected cup, and all throw times are set for that size.
2. Press to choose between 5, 7, 8, and 9 ounce cups. When you
switch between cup sizes, the display shows
CUP
? X OZ
. The question
mark means that you have the option of setting the factory default throw
times for the new size ("X") cups, or you may reload the defaults for the
present cup size. To do this, press and hold . The display
momentarily shows
CLEARING
, then two beeps sound and
FINISHED
is
displayed. See the tables on the next page for the factory default times.
3. Press until you have left the function.
SET WHETHER YOUR MACHINE IS FRESH BREW OR
FREEZE DRY
1. Press , then press until the display shows either
J
=
FB. 0.4.6.8.9
OR
J
=
FD. 0.4.6.8.9
2. FB means that the machine is fresh brew, FD means the machine is
freeze dry.
3. Press to switch between the two choices. Be sure you have
selected the right configuration for your machine.
4. Press until you have left the function.
To Next Page
Loading...
Need help?
General
