Firmware Upgrade
Security Statement
For the purpose of engraving or cutting with a laser engraving machine, allow the workpiece to be
exposed to the high-density laser beam emitted by the laser engraving machine. The workpiece may be
the machine breakdown and environmental contamination.
3. Clean the tripod and laser module with a dry cloth regularly when the power is off.
4. Ensure to run the laser at 0°C-35°C.
or stainless steel plate on the workbench, and then place processing material.
11. Children under 10 years old are not allowed to run the machine without adult presence, which otherwise
To Next Page
Loading...
