Creality Ender-6 User Manual

The rubber pad at the bottom of machine will be slightly deformed under stress.
If this happens when you install the acrylic plate, please loosen the foot pad first, and then lock them after installing the acrylic board.
由于底部橡胶垫在受力情况下会有微小变形，安装亚克力板时如出现和橡胶垫陷入部分干涉，可先将脚垫微松，安装完亚克力板后再锁紧脚垫。
10

Creality Ender-6 Specifications

General

Build Volume	250 x 250 x 400 mm
Layer Resolution	0.1 - 0.4 mm
Printing Speed	Up to 150 mm/s
Filament Diameter	1.75 mm
Connectivity	USB, SD Card
Display	4.3-inch Touchscreen
Max Nozzle Temperature	260°C
Max Bed Temperature	100°C
File Format	STL, OBJ, AMF
Feeder System	Bowden
Printing Technology	FDM (Fused Deposition Modeling)
Frame Structure	Core-XY
Power Supply	350W
Machine Dimensions	495 x 495 x 650 mm
Machine Weight	20 kg
Nozzle Diameter	0.4 mm
Supported Materials	PLA, ABS, PETG, TPU